Electric Vehicle Charging Installations & Voltage Drop

| A.C. & D.C charging stations | Connectors | Design Voltage Drop – Impact on Power Network |

Part 1

What you’ll learn

  • Practical resolved problems. Tests..
  • Electric Vehicle/Cars charging modes according to IEC 61851-1; SAE J1772 ;.
  • Chademo (AA), CCS1/Combo1 (EE), CCS2/Combo2 (FF), GB/T (BB) according to IEC 62196-3 ;.
  • Type 1, Type 2 (Mennekes plug), Type 3 according to IEC 62196-2 ;.
  • Voltage drop impact to the Electrical Distribution Network..

Course Content

  • Electric Vehicle Conductive Charging System | IEC 61851-1 | –> 8 lectures • 1hr 18min.
  • Plugs socket-outlets, vehicle connectors and inlets. | IEC 62196 | SAE J1772 | –> 6 lectures • 52min.
  • Test/Exam –> 0 lectures • 0min.
  • EV charging stations. Voltage drop calculation. Advanced | BS 7671 | –> 18 lectures • 1hr 45min.
  • bibliography –> 1 lecture • 1min.

Electric Vehicle Charging Installations & Voltage Drop

Requirements

  • For first part: This course starts from basic – step by step. Basic knowledge of physics..
  • For other parts: Have a basic Electrical Engineering knowledge..
  • Part 1
  • Standardization and interoperability in e-mobility.
  • International Electrotechnical Commission (IEC)
  • The International Telecommunication Union (ITU)
  • International Organization for Standardization (ISO)
  • European & US standardization
  • IEC 61851-1 / EN 61851-1 -Electric vehicle conductive charging system. Part 1: General requirements
  • EV charging modes
  • EV charging levels. SAE J1772
  • This course is for those who wants to understand Electric Vehicle/Car conductive charging system and its plugs, socket-outlets, vehicle connectors and vehicle inlets in order to chose the right EV and its charging station;
  • After this course you will know and understand all connectors and vehicle inlets and its configurations (pin, sleeve etc.).
  • You will learn about:
  • A.C. charging. Plugs, socket-outlets, vehicle connectors and vehicle inlets;
  • D.C. charging. Plugs, socket-outlets, vehicle connectors and vehicle inlets.
  • You will learn the basic about the main International and European standards and law:
  • The IEC 61851- Electric vehicle conductive charging system ;
  • The IEC 62196- Plugs, socket-outlets, vehicle connectors and vehicle inlets — Conductive
    charging of electric vehicles ;
  • Configuration: AA, BB, CC, DD, EE, FF. Chademo, CCS1, CCS2, GB/T, Combo 1, Combo 2.
  • Part2. Advanced.
  • Alternative voltage definition
  • Voltage Drop in radial electric network supplied by one load
  • Problems
  • Voltage Drop in radial electric network supplied by more concentrated loads along the line
  • Impact of the Integration of the EV charging stations in the electrical distribution network
  • BS 7671.Voltage drop calculation.
  • Correction factors for operating temperature and load power factor

 

 

Get Tutorial