Implementing Windows Server 2016 Infrastructure Services

Deploy the first and the second Active Directory domain controller, DNS, DHCP Failover, NTP server, and Linux NAT router

In this 1-hour course, you will learn how to:

What you’ll learn

• Install VMware Workstation.
• Create virtual machines related to the lab setup.
• Install and configure a Linux server as a NAT router.
• Install Windows Server 2016.
• Install and configure Active Directory Domain Services (AD DS).
• Configure DNS server.
• Configure Network Time Protocol (NTP) server.
• Deploy an additional domain controller.
• Create an Organizational Unit and a user.
• Verify replication between domain controllers.
• Install, authorize, and configure a DHCP server.
• Install Windows 10 Enterprise.
• Join a client to a domain.
• Implement DHCP High Availability.
• Test DHCP failover.

Course Content

• Introduction –> 1 lecture • 1min.
• Downloading software –> 1 lecture • 2min.
• Building your lab environment –> 3 lectures • 9min.
• Installing and configuring a Linux Server as a NAT router –> 4 lectures • 13min.
• Installing and configuring Windows Server 2016 on DC1 –> 3 lectures • 6min.
• Setting up a new forest root domain –> 1 lecture • 3min.
• Configuring DNS server –> 1 lecture • 3min.
• Configuring Network Time Protocol (NTP) server –> 1 lecture • 3min.
• Installing and configuring Windows Server 2016 on DC2 –> 3 lectures • 6min.
• Setting up an additional domain controller –> 1 lecture • 4min.
• Verifying replication between domain controllers –> 1 lecture • 3min.
• Implementing DHCP Server –> 2 lectures • 5min.
• Installing and configuring Windows 10 enterprise –> 3 lectures • 6min.
• Deploying an additional DHCP server –> 1 lecture • 2min.
• Implementing DHCP High Availability –> 4 lectures • 8min.
• Conclusion –> 1 lecture • 1min.

Requirements

• 1.5 GHz CPU or faster 64-bit processor.
• 8 GB RAM or more.
• 200 GB free disk space (SSD Drive recommended).
• Internet.
• No prior experience is required.

In this 1-hour course, you will learn how to:

• Build your own lab using VMware Workstation
• Install and configure a Linux server as a NAT router
• Implement Active Directory Domain Services (AD DS), DNS, and DHCP
• Configure a Network Time Protocol (NTP) server
• Deploy an additional domain controller
• Install and join a Windows 10 client
• Implement DHCP High Availability
• Test replication and DHCP failover

By the end of this course, you will gain hands-on experience with the most common infrastructure services such as Active Directory Domain Services (AD DS), DNS, and DHCP.